Zephyr Cypress AK7836BS, Use, Care And Installation Manual

Page: 12 / 22

10
www.zephyronline.com
C/L
C/L
A
B
16
7/8
”
min
30”
4” wood board
FIG. 1
16 7/8”
16 1/8”
13 5/8”
1 11/16”
3 5/16”
21 1/4”
35 1/4” (42”, 48”, 54”)
5 5/16”
FIG. 2
Installation –
Mounting the Range Hood
6HOHFWSUHIHUUHGGXFWLQJDSSOLFDWLRQYHUWLFDORUKRUL]RQWDODQG
prepare hood. Refer to page 11 for horizontal ducting conversion.
2. Plum and mark center line on wall.
&KRRVHGHVLUHGKHLJKWDERYHFRRNLQJVXUIDFH´PLQ/HYHO
DQGPDUNKRRGERWWRPOLQH$),*
/HYHODQGPDUNWRSRIZRRGERDUGOLQH%),*´IURP
line A.
5. Mark center line of wood board. Center and align top of board with
OLQH%6HFXUHZRRGERDUGWRVWXGVXVLQJ0ZRRGVFUHZV
Wood Board Dimensions
:['[+
AK7836BS - 33” x 1/2” x 4”
AK7842BS - 39” x 1/2” x 4”
AK7848BS - 45” x 1/2” x 4”
AK7854BS - 51” x 1/2” x 4”
6. Prepare duct pipe and duct cut outs in upper cabinet if needed or
ZDOO,IKRUL]RQWDOO\GXFWLQJKRRG5HIHUWRKRRGVSHFL¿FDWLRQVRQ
page 8 for dimensions.
7. Prepare electrical wiring and electrical cut outs in upper cabinet if
needed or wall if horizontal electrical hook up is required. Refer to
KRRGVSHFL¿FDWLRQVRQSDJHIRUGLPHQVLRQV
0RXQWKRRGRQWRZRRGERDUGDQGVHFXUHXVLQJ0ZRRG
screws.
9. Further secure hood onto wall through lower body screw holes by
0ZRRGVFUHZV6HHGLPHQVLRQVLQ),*
10. Install electrical.
,QVWDOOGXFWZRUNDQGVHDOZLWKFHUWL¿HGDOXPLQXPGXFWWDSH
12. Power up hood and check for leaks around duct tape.
,QVWDOOEDIÀH¿OWHUV
CAUTION: At least two installers are required
due to the weight and size of the hood.
!
WARNING: Electrical wiring must be done by a qualified person(s) in
accordance with all applicable codes and standards. This range hood must be
properly grounded. Turn off electrical power at service entrance before wiring.
!