14
www.zephyronline.com
Installation –
External Blower Preparation
3. Place cap over threaded cable lock and secure
by turning cap clockwise.
NOTE:
Due to the
size of the cap, it may be easier to install it
after the hood has been mounted.
4. Connect 6 pin male connector from external
blower wiring to 6 pin female connector on
control board box. Attach green ground wire
from external wiring to ground screw on hood.
EXTERNAL BLOWER PREPARATION
3ODFH´URXQGPRXQWLQJSODWHRQWRSRIKRRG
and secure using eight M4*8 screws.
2. Install threaded cable lock and external
blower wiring through the knockout next to
the electrical wiring knockout.
NOTE:
For instructions on mounting the external blower please refer to the CBE-1000 external blower manual
included in the external blower packaging or on our website. www.zephyronline.com
Summary of Contents for CACHE CCA-E30ASX Use
Page 2: ...www zephyronline com...
