Installation –
Mounting Height & Clearance
6
www.zephyronline.com
DUCTING
$PLQLPXPRI´URXQGRU´[´UHFWDQJXODU
duct work must be used to maintain maximum air
ÀRZHI¿FLHQF\ZLWKWKHFIPLQWHUQDOEORZHU
$PLQLPXPRI´WR´URXQGGXFWZRUNPXVWEH
used with the 1000 cfm external blower.
Always use rigid type metal ducts only. Flexible
GXFWVFRXOGUHVWULFWDLUÀRZE\XSWR
Use calculation (on page 5) to compute total
available duct run when using elbows, transitions
and caps.
ALWAYS, when possible, reduce the number or
transitions and turns. If long duct run is required,
LQFUHDVHGXFWVL]HIURP´WRRU´,IDUHGXFHULV
used, install a long reducer instead of a pancake
reducer. Reduce duct size as far away from
opening as possible.
If turns or transitions are required; install as far
away from opening and as far apart, between 2,
as possible.
Minimum mount height between range top and
KRRGERWWRPVKRXOGEHQROHVVWKDQ´
Maximum mount height should be no higher than
´
It is important to install the hood at the proper
mounting height. Hoods mounted too low could
UHVXOWLQKHDWGDPDJHDQG¿UHKD]DUGZKLOHKRRGV
mounted too high will be hard to reach and will
ORVHLWVSHUIRUPDQFHDQGHI¿FLHQF\
If available, also refer to range manufacturer’s
height clearance requirements and recommended
hood mounting height above range.
Vertical:
´URXQGPLQLPXPLQWHUQDOEORZHU
´WR´URXQGPLQLPXPH[WHUQDOEORZHU
Horizontal:
´[´PLQLPXPLQWHUQDOEORZHU
No horizontal option available for external blower
10-23/64"
36"
96"
Min 24"-Max 32"
Summary of Contents for CACHE CCA-E30ASX Use
Page 2: ...www zephyronline com...
