www.zephyronline.com
Installa
tion - Moun
ting the R
ange Hood
3. Lift the hood onto the screws
(type D) and adjust to make
sure the hood is level.
4. When the hood has been
adjusted tighten the screws to
secure the hood in place.
NOTE:
Screws must be fastened into wooden studs so wood blocking may be
necessary. If using wall anchors make sure to check your local codes for suita-
bility and type of anchors to use.
NOTE1
: For the various installations use screws and screw anchors suited to the
type of wall (minimum screw size: 1/4" diameter x 2-3/4" length).
NOTE2
: The following Duct Cover kits are available as acessories: Z1C-00HZ
and Z1C-01HZ.
- 18 -
