www.zephyronline.com
5. Install the plate with the fl ange facing
the wall, inside the motor casing: carry
out the instructions at stage 3 in rever-
se order then use the screws provided
to complete installation. (Tot. 12 type
B). (
Note!
If air is discharged from the
top, rotate the plate and install it in the
opposite direction with the fl ange fa-
cing upwards) Fig.5
6. Put the top cover back on.
7. Open the fl ap Fig.6
8. With the aid of a slotted screwdriver,
break the grommet of circular hole
through which the wires pass. Fig. 7
9. Insert the female connector in the
terminal box already attached to the
hood. Fig. 8A
Installa
tion - Ex
ternal & In-Line Blo
w
er P
repar
a
tion
- 14 -
