INSTALLATION
CONVERTIBLE OPTIONS
Models: AK6500, AK6536, AK6542, AK2500, AK2536
Page 7
INSTALLATION
CONVERTIBLE OPTIONS
Models: AK6500, AK6536, AK6542, AK2500, AK2536
Page 6
This range hood is equipped with the option of a 6” vertical discharge, 3 1/4”x10” vertical discharge,
or 3 1/4”x10” rear discharge. Additional accessories are provided to convert to either of the above
discharge methods.
Convertible Options
Vertical discharge 6” round
Vertical discharge 3 1/4”x10”
Horizontal rear discharge 3 1/4”x10”
Convertible Accesories
Round transition adapter
Rectangular transition adapter
Rectangular rear cap (pre-mounted)
3 1/4”x10” starting collar
3 1/4”x10” Vertical Discharge
1. Remove pre-mounted 6” transition adapter or duct
opening.
3. Mount the 3-1/4”x10” starting collar on top of
transition piece with remaining screws.
2. Place rectangular transition adapter as shown
by first installing 4 screws on half round
section.
3 1/4”x10” Rear Discharge
1. At rear of range hood, remove all screws on pre-
mounted rear rectangular cap and remove plate.
6. Mount starting collar (provided) at rear discharge.
5. Mount rectangular plate (previously removed) on
top of transition adapter.
4. Mount rectangular transition piece to top
opening as shown.
2. Remove top pre-mounted transition piece.
3. Remove 2 air diverter blocks through top
opening as shown.
