Zephyr AK1200BB, Use, Care And Installation Manual

Page: 18 / 60

18 Breeze I & Breeze II Use, Care, and Installation Guide
B R E E Z E I &
B R E E Z E I I
U N D E R - C A B I N E T
C O R E
Installation Instructions
Air Recirculating Mode Conversion
An air recirculating kit (optional) must be
purchased before using hood in recirculat-
ing mode.
Recirculating kit - 0AK11-21001
‡’Žƒ ‡‡–ŮŽ–‡”ĚřŚŚĚśřřřŚ
1. Secure each of the (2) spring clips to the
safety grille body (A). Do this by inserting
the screw through the spring and into the
clip. Secure each clip to the safety grille
body by using a philips head screwdriver.
śĘ•‡”– Šƒ” ‘ƒŽŮŽ–‡”‹–‘ Šƒ” ‘ƒŽŮŽ–‡”
holder and place it over the safety grille
body
Ŝʇ —”‡ Šƒ” ‘ƒŽŮŽ–‡”Š‘Ž†‡”–‘•ƒˆ‡–›
grill body by lifting up on spring clips and
twisting. The clip should cover the lip of
–Š‡ Šƒ” ‘ƒŽŮŽ–‡”Š‘Ž†‡”•‡ —”‡Ž›Ę
4. Remove each screw from recirculating
top plate. Plate is located on top of hood
towards the front.
NOTE: Skip the recirculating preparation pages if you are ducting the air out of your home.