TO START WEIGHING
A.
Place the scale on a solid and flat surface.
B.
Place bowl (if used) on the scale before turning on the scale.
C.
Press “ON/OFF” button to enter weighing mode.
D.
Start weighing until LCD shows “0.0g”.
E.
Load weighing objects on to start weighing, LCD will show the weight
reading.
F.
Press “ON/OFF” to turn off.
ZERO OR TARE FUNCTION
To weigh differents loads consecutively without removing loads from the scale. Put first load on the scale, get weight
reading. Press “Z/T” button to reset the LCD reading “0” before adding next load. You can repeat this operation.
Condition 1: “ZERO” function
When total sum of all loads on scale <= 4% of scale’s max weight capacity.
(4%=80g when capacity is 2000g; 200g when capacity is 5000g)
LCD will show “---“ or “0.0g” each time “Z/T” button is touched. “---“ means that the
process about waiting for zero and stable. LCD will show “0.0g” after scale is stable.
Meanwhile, an icon “0” on lower left corner of LCD means “ZERO” function is active.
Capacity remains unchanged.
