Zephir ZHC485, Instruction Manual

Page: 11 / 16


Only connect the appliance to a correctly installed safety plug (220-240V 50Hz/60Hz).

Turn the selector switch clockwise to set the toasting level from the lightest stage 1 to the
darkest stage 6. If in any doubt, start with the lower setting (the black mark on the selector
switch shows you the setting).

Insert sliced bread into the toasting slot and push down the lever until it locks.

The appliance starts toasting. The appliance switches off immediately once the set degree of
toasting has been reached. The toast then pops up automatically.

The toaster only allowed 2 slices of the toaster to be toasted at a time.
CANCEL BUTTON
1. The toasting cycle can be interrupted at any time by pressing the
“Cancel” button
To stop toasting prematurely, push the b
utton “Cancel”
1 . Insert the plug into the socket
On first use, it is recommended to operate the toaster , with empty slots, in order to remove the
dust that accumulates on the new item and remove any bad smell. In addition, for this you should
use an average temperature .
2 . Place a slice of bread into the slot - use slices of the same size and texture. Do not use slices
broken or torn , because crumbs could be settled in the bottom of the toaster.
3 . Place the control knob to the desired degree of browning , from position 1 (light) to position 6 (
maximum ) . Different types of bread require different roasting . The higher the degree of work , the
more dense the color of roasting .
4 . Press down on the lever until it locks .
NOTE: The lever will not lock until the toaster will not be switched on.
5 . When the toasting process is over, the lever will return to the initial position and the toaster will
switch off.
NOTE: The toasting cycle can be interrupted by pushing the "Cancel" button.
FROZEN BUTTON

The Defrost function is designed to firstly defrost and then toast the bread, which extends the
toasting cycle slightly.

1. Insert the bread into the bread slots.

2. Turn the Browning control to the desired position

3. Press the lever down until it locks into position and at the same time press the Defrost
button to select the defrost function.

4. When the toasting cycle is complete, the lever will rise and the toaster will switch off. To
terminate the cycle before it is completed, press the Cancel button.
GUIDE