•
N
ever attempt to stop the fan blades when it is in operation
•
A
ll wiring must be in accordance with the National Electric Code and local electrical codes. Electrical installation
should be performed by a qualified licensed electrician.
•
D
o not operate reversing switch while fan blades are in motion. Fan must be turned off and blades stopped
before reversing blade direction.
•
A
void placing objects in the path of the blades.
•
D
o not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth
will be suitable for most cleaning. Turn off the electric power supply before cleaning.
•
A
fter making electrical connections, spliced conductors should be turned upward and pushed carefully up into
outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor
on one side of the outlet box.
•
R
emove the packing and make sure that the appliance is intact.. In case of doubt do not use it and address to an
after-sale service reccomanded by the manifacturer. Children shall not play with the appliance.
•
C
leaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep
the appliance and its cord out of reach of children less than 8 years.
•
A
fter removing the packing materials, check the integrity of the appliance; If you are unsure, do not use it and ask
for qualified professional help.
•
T
he packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because
they are potential sources of danger.
•
B
efore connecting the appliance, check if the electrical voltage and frequency of the circuit correspond to those
indicated on the appliance.
•
T
his appliance must only be used for the purpose for which it has been manufactured, therefore as a fan. The
manufacturer is not responsible for any damage caused by improper or incorrect use.
•
W
ARNING.The installation of this appliance can be done by qualified electricians ONLY.
•
S
ince the installation of the equipment sets, the power of the network must be done through flexible cable plug or
by-pole switch with contact opening distance of not less than 3 mm.
•
F
or the installation of the fan use a cable type H05 VVF.
