C. The six AA- size batteries for the motor drive system must be loaded in the battery holder taken out, with their polarity marks
coincided to the indications on the holder. The battery holder in which the batteries have been loaded must be inserted into the
battery chamber in the arrow- direction indicated on the holder.
A. Set the mode selector switch to Sm or Cm and then depress the battery check button. If a red-colored LED lights up at the rear
end of the shutter speed scale window, the battery for the electronic shutter is loaded properly and there is sufficient power for
operations. * If the LED does not light up, (1) Mode selector switch is on "OFF" position, (2) the battery is not loaded properly or (
3) it is completely drained and should be exchanged.
B. The batteries for the motor drive system are checked by setting the mode selector switch to Sm or Cm and depressing the drive
button to check whether there is motor drive operation or not.
3.
Exchanging Lenses
The Zenza Bronica SQ-Am will not operate properly unless the lens is attached. Furthermore, it will not be possible to attach
or remove the lens unless both main body and lens are in the "cocked" condition, with the cocking pin on the lens positioned
between the red-colored band and green-colored dot and the cocking pin of the body set to the green dot. When the cocking
pins are not located properly for attaching the lens, simply move the cocking pin of the lens to the green dot manually, with
your finger, and press the drive button to cock the lens shutter when the cocking pin of the main body is not located at the
green-colored dot.
A. To attach the lens to the body, align the orange dot on the camera main body and the red dot on the lens, and then insert the
lens fully into its mount. Rotate in the counterclockwise direction until it stops, with an audible click, which will indicate that it is
securely locked.
