Zenty ZT-111, User Manual

Page: 13 / 31

(844) 200-1945 | sales@zenty.com Page 13 of 31 Copyright © Zenty AV
The group ID of transmitters is:
TX1 (01)
TX2 (02)
TX3 (03)
If you need display Source on TV1, then just set Group ID of RX1 same as TX1: 01(see below picture).
Step 1: Make sure the Transmitter and PC are in the same domain. (Refer to 5.1.1)
Step 2: Use an Ethernet Cable to connect the PC (or laptop) and the Extender. the power LED for the
extender is red and the green status LED is blinking.
Step 3: Power on the TX or RX with 5V 1A power supply.
Step 4: Login in IE: 192.168.1.11 (default IP for TX) or 192.168.1.12(default IP for RX), TX requires
user name: admin and password: admin.
Step 5: Change the group ID at “Stream setting”, “00” means group “00” here which can be chosen
from 00 to 63.
Step 6: Click “Submit” (transmitter) or update (receiver).