17
Start
Package Contents
Digital TV box, remote control (2 batteries included),
HDMI cable, SCART cable, power supply cable, net-
work cable (RJ45), Smart card (CA, Conax Conditional
Access).
The Digital TV Box
The digital TV box is intended for viewing digital TV
from Tele2 on your TV. It is capable of decoding high
resolution programme content, enabling you to view
HD channels if your TV is HD-ready.
The box can receive digital TV from cable (DVB-C) or
broadband (IPTV).
The box has two receivers (tuners), which makes it pos-
sible to record and watch TV simultaneously.
The digital TV box emits some heat but is not equipped
with a ventilation fan. The ventilation slots on the cast-
ing provide ample electronics cooling in normal room
temperature. Never cover the ventilation slots. Read
more under the section Safety Instructions.
Front
There is a LED indicator on the front of the box that
indicates the status of the receiver:
No light
: The digital TV box is shut Off
No light + channel nr
: The digital TV box is On
Red light + clock
: Standby mode / Power saving mode.
Single red blink
: Signal received from the remote control
The power switch is used to put the box in power
saving mode, but it does not cut the power to the unit.
Back
•
Main power socket, low voltage
•
Main power switch, shuts off power to the box
•
HDMI socket, for connection to TV
•
USB socket, currently not in use
•
SCART-1, socket to connect to TV
•
SCART-2, socket to connect to video recorder
•
AUDIO, analogue RCA output for connection to
HiFi equipment
•
S / PDIF (sound) for optimal digital connection to
HiFi equipment
•
ETHERNET (RJ45 socket) for connection to broad-
band through Tele2 Home Gateway or LAN
•
ANTENNA IN, socket for connection to cable TV
socket in the wall
Left side
•
Slot for Smart Card, Conax Conditional Access
•
USB socket, currently not in use
Please shut power off before you connect/dis-
connect any cables to avoid possible damage
to the electronics or yourself.
