
Q
Q
Q
QUICK SETUP GUIDE
UICK SETUP GUIDE
UICK SETUP GUIDE
UICK SETUP GUIDE
Zensol Automation Inc.
www.zensol.com
21
Step 5g – Analog inputs configuration
•
Current input
When you open a test plan, it probably has default analog values. Once you have verified the calibration in the
previous step, you can scale this calibration to the real values you measure. A good habit to have is to save the
test plan once our calibration data is entered, so that you won’t have to do it twice.
In the properties of input #1, click on the « Cal » button and the enter the desired values into the textboxes.
For
this
AC
current clamp, set on the 20A range, I would enter 100mV for 1 amp.