Q
Q
Q
QUICK SETUP GUIDE
UICK SETUP GUIDE
UICK SETUP GUIDE
UICK SETUP GUIDE
Zensol Automation Inc.
www.zensol.com
27
How to use this plan:
The test plan has only 4 activated tests. They all verify one input at the time.
To execute the tests, click the
Execute Test
button. To change tests, use the
blue arrows
:
Test 1– AC Clamp Test.
Plug a small wire between the two “Current” connectors. The AC clamp must pass through the wire and be
plugged in the input #1, as seen in the image below.
You are now ready to execute the test.
Test 2, 3 and 4 – Accelerometer Tests.
Screw an accelerometer to the chassis of the TAP-4 to the designated area. Then, plug the accelerometer
cable into the corresponding input you want to test.
You are now ready to execute the test.
