Page
11
of
15
First Time Use
：
Open package carefully, inspection parts below:
•
Pruning Shear
•
Battery
•
Charger
•
Pruner Battery Wire
•
Harness
•
Maintenance Tool Kit
•
Wire Straps
•
Manual
Disconnect Battery From Tool Before Charging.
•
Always check battery connectors – make sure connections are dry and clean before
charging.
•
The first time use of battery will need to be fully charged.
•
Replace battery if charging time takes over 5 hours.
•
Read all safety rules and environmental precautions before using tool.
Charging battery
：
1
．
Charging temperature at
＋
50
°
F~
＋
72
°
F indoor.
2
．
Check switch is at “OFF” position at charging.
3
．
Connect adaptor to charger with battery correctly.
4
．
Always check specifications before charging.
5
．
Red LED light indicates charging needed, green LED light indicates full charge,
average charging time about 4-5 hours.
6
．
Pull out connector from power and battery after charging is complete.
7
．
Please make sure to charge battery at least one time per month if battery is not used.
Assembly
：
Please make sure pruner, cable and battery connections are clean and dry.
Assemble as below:
1.
Take out the backpack and battery from the protective carrying case.
2.
Put battery into the backpack back pocket with the top of the battery pointing down
allowing the top of the battery to protrude out the bottom of the pocket exposing the
connector, power switch and LED readout. Connect the cable from left side -
reverse
the direction of the battery if left-handed. Secure battery in the pocket with provided
