Page
8
of
15
Using Charger Correctly
：
：
：
：
a.
Use original charger with rechargeable battery only. Other alternative chargers and
batteries can cause fire or explosion.
b.
Always check charger, wire and plug before using. Don’t use damaged charger or
repair yourself for safety reasons.
c.
Voltage of charger must match your battery; if not same voltage damage will occur.
d.
Disconnect charger before connecting and turning on the ePruner.
e.
Keep charger clean and away from moist or rainy environment. Don’t use the charger
outdoors as dirt or water will cause damage.
f.
The charger is designed for original battery only.
g.
Avoid using a damaged charger as it will cause damage.
h.
Don’t use charger on flammable surface (e.g. paper or dry goods).
i.
Damaged wiring must be replaced.
j.
Fully charge battery 4-5 hours before using tool for the first time. Connect the battery
to charger and completely charge the battery before powering on.
k.
To prevent damage, disconnect charger from battery when fully charged.
l.
Normal charging time is 4-5 hours. Charger LED will indicate a green when the
battery is done drawing a charge and is completely charged and red while charging.
Caution
：
：
：
：
Using the tool carefully will avoid risks as below:
e.
Blades are sharp and can result in injury to body parts and personal property.
f.
Loud noises will damage your ear without ear protection.
g.
Using tool for extended periods of time or in an irrational way may cause
injury.
Warning!
Tool emits electromagnetism; this may interfere with implanted medical devices in
body. Consult your doctor before using tool if you have an implanted medical
device.
Warning!
Don’t touch blade with anything other than what you intend to cut when using tool
to avoid injury.
Check blade for sharpness and sharpen blade before use. A dull blade may damage
tool which will not be covered under warranty.
