19
Checking the Battery Charge Level
To determine your ePruner battery charge level your ePruner is supplied with a simple to read
LED readout which features 3 green and 1 red light. To illuminate the readout, hold the button
down on the handle of the tool. The readout is located on the back of the handle.
When all 3 green lights are illuminated then your battery is at or near full capacity. Depending
on operating variables such as diameter of cut, density of wood and frequency of the cuts a
typical battery charge will last 3-4 hours. Each green light represents roughly an hour.
When the red light is illuminated then you should charge the battery as soon as
possible.
Audible Tone Notifications
Beeps
Interval
Frequency Indication Description
1 time
0.3 seconds
Not
repeating
On and off, change in opening size of the blade.
2 times
0.3 seconds
Repeat 10
times
Charging or ePruner is not connected. Please
check if the ePruner and the connector plugs at
both ends of the battery are firmly connected.
3 times
0.3 seconds
Repeat 10
times
Faulty plate opening.
4 times
0.3 seconds
Repeat 10
times
The stroke plate is closed, and the hull is faulty.
Short 4
times
0.1 seconds
Not
repeating
The battery is running out. Please charge as
soon as possible.
10 times
0.3 seconds
Repeat 10
times
Pruner has cut over 100,000 times. Remove the
front cover: blade, pin, screw. Lubricate as
specified for the maintenance of the moving
connection points.
Long 1
time
5 seconds
Repeat 10
times
Pruners have cut over 500,000 times. Requires
comprehensive inspection and maintenance,
please contact your local dealer (1-
year maintenance free of charge can once).
Note: Pruners that have cut over 500,000 times, require comprehensive inspection and
maintenance. Please contact the local dealer (One free maintenance session is provided for the
first year).