MUGL
Page 30 of 38
rev. 18 November 2009
Above right it is possible to set the command sources:
“Sorgente riferimento” (source reference):
•
da pannello (front panel potentiometer)
•
analogico (analog input 1; 0÷10V)
•
seriale (serial interface)
“Sorgente Start” (Start source):
•
pannello/seriale (front panel/serial interface)
•
ingresso digitale (digital input)
Note: In order to control the converters with the software you need to set:
“Sorgente riferimento”: seriale (serial interface)
“Sorgente Start”: pannello/seriale
bottom left, you can set the FVC voltage and frequency outputs:
•
With digital potentiometer.
•
By entering the number expressed in% in the box under the potentiometer.
•
Using increment and decrement arrows keys placed under the potentiometer.
Once the value is set click on the button “scrivi” to transfer it to the converter.
If the box “Scrittura Automatica” is selected, each modification of the reference will be
automatically written in the converter.
With the Start and Stop buttons it’s possible start and/or stop the supply of energy.
