MUGL
Page 26 of 38
rev. 18 November 2009
11 GesPWM software
The “GesPWM” software is compatible with WINDOWS XP systems and allows to set up
some important parameters of the converter; it must be installed on a suitable PC and
executed.
Such software is designed to set up the parameters of different equipment types we
produce, therefore it’s possible that are displayed some parameters that have no function
for this specific converter.
11.1 Connecting the equipment to the PC
The converter must be connected to the PC trough the serial port of the console by means
of the specific cable.
After the connection has been done and the program GesPWM is executed, the following
mask will appear:
By means of the menu “Set” it’s possible to
select the parameters for the serial link:
PC port and baud-rate
.
In this case the baud-rate must be 9600
In position “2” must be set:
2
3
1
4
