Bluetooth Headset for iPOD
FCC Information
Using the program
1. Execute ‘BluPod_Verxxx.exe’ file provided, then
automatically unzipped at the default folder(C: BluPod
BluPod_Verxxx) of PC.
How to upgrade Firmware
2. Execute ‘DFUWizard.exe’
file unzipped, and then the
screen will be displayed.
3. How to connect and execute
3-1. Push down BluPod
Hold Key
3-2. Connect BluPod to
your PC using mini
USB jack provided
3-3. Click ‘Next’ button
activated which may
take several seconds
4. If successfully complete, click ‘Finish’ button.
This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions :
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
FCC compliance Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, Pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio Frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Information to User
