GB-5
PSJ2310
G
B
IMPORTANT
Remove any obstacle before beginning
work.
4. Inspect the entire unit for loose fasten-
ers and fuel leakage. Make sure that
the cutting attachment is properly
installed and securely fastened.
5. Always use the harness. Adjust the
harness for comfort before starting the
engine. The harness should be ad-
justed so the left hand can comfort-
ably hold the handlebar grip ap-
proximately waist high.
STARTING THE ENGINE
1. Keep bystanders and animals at least
15 m away from the operating point.
If you are approached, immediately
stop the engine.
2. The product is equipped with a cen-
trifugal clutch mechanism, so the
cutting attachment begins to rotate as
soon as the engine is started by put-
ting the throttle trigger into the start
position. When starting the engine,
place the product onto the ground in
a flat clear area and hold it firmly in
place so as to ensure that neither the
cutting part nor the throttle come into
contact with any obstacle when the
engine starts.
WARNING
Never place the throttle trigger into the
high-speed position when starting the
engine.
3. After starting the engine, check to
make sure that the cutting attachment
stops rotating when the throttle is
moved fully back to its original posi-
tion. If it continues to rotate even after
the throttle trigger has been moved
fully back, turn off the engine and take
the unit to your authorized ZENOAH
servicing dealer for repair.
USING THE PRODUCT
IMPORTANT
Cut only materials recommended by the
manufacturer. And use only for tasks
explained in the manual.
1. Grip the handles firmly with both
hands using your whole hand. Place
your feet slightly apart (slightly further
apart than the width of your shoulders)
so that your weight is distributed
evenly across both legs, and always
be sure to maintain a steady, even
posture while working.
2. Maintain the speed of the engine at
the level required to perform cutting
work, and never raise the speed of the
engine above the level necessary.
3. Never operate the pruner at an angle
greater than 60° in order to reduce the
risk of being struck by falling objects
during operation.
4. If the unit starts to shake or vibrate,
turn off the engine and check the
whole unit. Do not use it until the
trouble has been properly corrected.
5. Keep all parts of your body away from
rotating cutting attachment and hot
surfaces.
6. Never touch the muffler, spark plug,
or other metallic parts of the engine
while the engine is in operation or
immediately after shutting down the
engine. Doing so could result in seri-
ous burns or electrical shock.
WARNING
Approaching or contacting electric
power lines with the pruner may cause
serious injury death from electrocu-
tion. Electricity can jump from one
point to another by means arcing or
may be conducted through damp
branches. Maintain a clearance of at
least 15m between the pruner and any
electrical line carrying live current.
• IF SOMEONE COMES
1. Guard against hazardous situations
at all times. Warn adults to keep pets
and children away from the area. Be
careful if you are approached. Injury
may result from flying debris.
2. If someone calls out or otherwise inter-
rupts you while working, always be
sure to turn off the engine before turn-
ing around.
MAINTENANCE
1. In order to maintain your product in
proper working order, perform the
maintenance and checking opera-
tions described in the manual at
regular intervals.
2. Always be sure to turn off the engine
and disconnect the spark plug wire
before performing any maintenance
or checking procedures.
WARNING
The metallic parts reach high tem-
peratures immediately after stopping
the engine.
3. When replacing the cutting attach-
ment or any other part, or when re-
placing the oil or any lubricant, always
be sure to
use only ZENOAH prod-
ucts or products which have been
certified by ZENOAH for use with
the ZENOAH product.
4. In the event that any part must be
replaced or any maintenance or repair
work not described in this manual
must be performed, please contact a
representative from the store nearest
ZENOAH authorized servicing dealer
for assistance.
5. Do not use any accessory or attach-
ment other than those bearing the
ZENOAH mark and recommended for
the unit.
6. Under no circumstances should you
ever take apart the product or alter it
in any way. Doing so might result in
the product becoming damaged dur-
ing operation or the product becom-
ing unable to operate properly.
5. For safe operation
01-PSJ2310_GB_209＿三.indd 5
12.9.12 1:09:25 PM