GB-3
PSJ2310
G
B
2. Specification
3. Warning labels on the machine
Never modify your machine.
We won’t warrant the machine, if you use
the remodeled pruner or if you don’t observe
the proper usage written in the manual.
If warning label peels off or becomes soiled
and impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning/Attention
(4) The unit has not been designed to provide pro-
tection from electric shock in the event of con-
tact with overhead electric lines.
The port to refuel the “MIX GASOLINE”
Position:
FUEL TANK CAP
The direction to close the choke
Position:
AIR CLEANER COVER
The direction to open the choke
Position:
AIR CLEANER COVER
The direction to adjust the chain oil flow.
Turn to “+” (clockwise) : increase, Turn to “-” (counter-clockwise) : decrease.
Position:
Upper side of the TRANSMISSION
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications,
please be careful not to make a mistake.
4. Symbols on the machine
PSJ2310
Overall size (L x W x H) ......10”: 2865 x 244 x 232mm
Dry weight ................................................. 10”: 5.9kg
Engine
Type ..............Air-cooled 2-stroke gasoline
Model ................................ Zenoah G23LS
Displacement .............................. 22.5cm
3
Fuel .................................................................. Mixture
when using FD grade oil ................................... 50:1
when using FC grade oil ................................... 40:1
Carburetor ............................ Walbro Diaphragm type
Spark plug ............................................ NGK BPMR7A
Fuel tank capacity ................................................. 0.6
Transmission ........ Centrifugal clutch, Rigid driveshaft
Reduction ratio .................................................... 1.06
Cutting head
Guide bar Type ..........................................OREGON
Size ..................................10 (25) in.(cm)
Saw chain Type ..................10”: OREGON 25AP-58E
Pich x Gauge ......1/4x0.050 (6.35x1.3) in.(mm)
Sprocket .................................................................. 8T
Oil pump ..................................................Plunger type
Oil tank ............................................................... 0.14
Standard Accessories
Shoulder Strap .................................................... 1 pc.
Goggle .................................................................1 pc.
Tool Kit ................................................................ 1 pc.
Guide bar protector ............................................ 1 pc.
Specifications are subject to change without notice.
01-PSJ2310_GB_209＿三.indd 3
12.9.12 1:09:22 PM
