Zenoah Komatsu G260RC, Owner'S Service Manual

Page: 9 / 20

7. Service Guide
1) REMOVING CLUTCH SHOE
1. Remove the housing and plug cap.
2. Remove the spark plug and fit the
stopper(4810-96220) into the plug hole.
3. Remove clutch bolts(14mm Hex.).
2) REMOVING ROTOR (FAN)
4. Remove the rotor nut(12mm Hex.).
5. Remove the rotor using the puller assy (2890-
96100). Apply 8mm puller bolts.
3) ASSEMBLING ROTOR
Insert the gauge(3330-97310) in between the
rotor magnet metal and the coil.Tighten screws
while pressing the coil against the rotor.
Air Gap 0.3 ~ 0.4mm
Clutch Bolt
(14mm Hex.)
Rotor Nut
17mm Hex.
Puller Bolts
Puller
Rotor
Wrench
Air Gap Gauge
Ignition Coil
9