- GB-8 -
Assembly
■
Blower pipe connection
N O T E
The connection procedure is the same for both the round nozzle and flat
nozzle. Select the nozzle type according to the application.
1.
Loosen the fastening screw on the body’s
pipe mount.
NOTE The fastening screw cannot be removed
from the body.
2.
Insert the middle pipe, aligning the screw
hole projection on its top with the slit in the
pipe mount. Fix the middle pipe in place by
tightening the fastening screw.
3.
Insert the nozzle, aligning the groove on its
end with the projection on the middle pipe.
Turn the nozzle clockwise to lock it in place.
Middle pipe
Round nozzle or
flat nozzle
Fastening screw
Middle pipe
Figure 1
Projection
Nozzle
Middle pipe
*01-HBZ260EZ_O-M_4ヵ国_GB_CS5_六.indd 8
15/11/17 11:31
