Zenoah GZ3500T, Workshop Manual

Page: 23 / 56

English –
23
Safety equipment
2
Remove the carburettor and the cover from the
choke outlet H.
3
Turn the throttle actuator rod downwards and guide
it out, see figure 30.
6.9 Dismantling the throttle lockout,
throttle and spring
1
Unscrew the air filter housing, the air filter holder
and the filter. Dismantle the handle part by loo-
sening screws A. Remove the throttle lockout B.
Remove the throttle C and the spring D. Loosen
the carburettor screw E. Remove the guide F.
Fig 29
Fig 30
Fig 28
Cleaning and checking
• Clean and check carefully all components.
Parts must be replaced if cracked or show
signs of other defects. Always use original
spare parts.
• Check that the spring is intact and retains all its
tension.
Fig 31