GB-3
G
B
eHT752S / eHT602D
SAFETY FIRST
Instructions contained in warnings within this manual marked
with a
symbol concern critical points which must be taken
into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.
WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions, which must be followed in or-
der to prevent accidents, which could lead to serious bodily in-
jury or death.
IMPORTANT
This mark indicates instructions, which must be followed, or it
leads to mechanical failure, breakdown, or damage.
NOTE
This mark indicates hints or directions useful in the use of the
product.
Contents
1.
Parts location .................................................. 4
2.
Specifications ................................................. 4
3.
Warning labels on the machine ...................... 5
4.
Symbols on the machine ................................ 5
5.
For safe operation ........................................... 6
6.
Fuel ................................................................. 9
7.
Operation ...................................................... 10
8.
Maintenance ................................................. 12
9.
Storage ......................................................... 15
10.
Disposal ........................................................ 15
11.
Troubleshooting guide .................................. 16
EC DECLARATION OF CONFORMITY
We,
Husqvarna Zenoah Co., Ltd.
1-9, Minamidai, Kawagoe, Saitama, Japan
declare in sole responsibility that the following products referred to in this
declaration conform with
DIRECTIVE 89/336/EEC, 98/37/EC
2000/14/EC Internal control production.
The products referred to are:
DESIGNATION
: HEDGE TRIMMER
MODELS
: eHT752S eHT602D
SERIAL NUMBERS
: 50100001 and up
The company named above will keep on file the following technical docu-
mentation for any inspection purpose.
• Operation instructions
• Plans and Drawings
• Description of measures designed to ensure conformity
• Other technical documentation :
Specification sheet
Inspection standard
Saitama, Japan
1st December 2007
Masahiko GOUDA
General Manager, Quality Assurance Department
