background image

GB-5

G

B

eHT752S / eHT602D

3. Warning labels on the machine

4. Symbols on the machine

If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).

Never modify your machine.
We won’t warrant the machine, if you use the
remodeled hedge trimmer or if you don’t ob-
serve the proper usage written in the manual.

For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications,
please be careful not to make a mistake.

The port to refuel the “MIX GASOLINE”

Position: 

FUEL TANK CAP

The direction to close the choke

Position: 

AIR CLEANER COVER

The direction to open the choke

Position: 

AIR CLEANER COVER

(1)

(1)Read owner's manual before operat-

ing this machine.

(2)Wear head, eye and ear protection.

(3)Handling this machine improperly

could result in accidents causing se-
rious injur y or death. Read this
manual carefully and practice using
the hedge-trimmer until you are fully
acquainted with all operations and
have learned to use it correctly.

(4)This is extremely sharp and can eas-

ily cause cuts.

Summary of Contents for EHT602D

















Reviews: