Zenoah EBZ8560, Operator'S Manual, Page: 9 / 68

4. Attach the cable to the flexible hose with the
cable clamp.
5. Attach the intermediate pipe to the control pipe.
6. Attach the blower nozzle to the intermediate
pipe.
To assemble the tube and handle on
the product (EBZ8560)
1. Attach the flexible hose (A) to the pipe angle with
the clamp (C).
C
A
D
B
E
F
G
2. Push the handle (E) onto the control pipe (B)
.
3. Attach and tighten the bolt, washer and nuts as
shown in the illustration.
4. Attach the control pipe (B) to the flexible hose (A)
with the clamp (D). Make sure that the mark on
the control pipe is up.
5. Attach the intermediate pipe (F) to the control
pipe.
6. Attach the blower nozzle (G) to the intermediate
pipe.
2142 - 005 - 06.07.2023 9