background image

GB-3

G

B

BC2604DL / BC2604DW

SAFETY FIRST

Instructions contained in warnings within this manual marked
with a 

 symbol concern critical points which must be taken

into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions, which must be followed in or-
der to prevent accidents, which could lead to serious bodily in-
jury or death.

IMPORTANT

This mark indicates instructions, which must be followed, or it
leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the
product.

Contents

1.

Parts location .................................................. 4

2.

Specifications ................................................. 4

3.

Warning labels on the machine ...................... 5

4.

Symbols on the machine ................................ 5

5.

For safe operation ........................................... 6

6.

Set up ............................................................. 9

7.

Fuel ............................................................... 10

8.

Operation ...................................................... 11

9.

Maintenance ................................................. 13

10.

Storage ......................................................... 15

11.

Troubleshooting guide .................................. 16

1. Parts location

(1) Primer pump
(2) Air cleaner cover
(3) Choke lever
(4) Fuel tank
(5) Starter knob
(6) Blade
(7) Gear case
(8) Debris guard
(9) Loop handle

(10) Drive shaft housing
(11) Sholder strap hanger
(12) Throttle lever
(13) Ignition switch
(14) Throttle cable
(15) Protector
(16) Handle

BC2604DL

BC2604DW

1

2

3

5

6

7

8

9

10

11

12

13

14

4

11

12

13

14

1

2

3

4

5

6

7

8

10

16

15

Summary of Contents for BC2604DL

















Reviews: