Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
8
2.2
GENERAL
2.2.1
CONFIGURATION
Figure 5
. General - Configuration
Note: depending on the number of buttons of the device being configured there may be
slight differences between the figures shown in this manual and the actual
configuration sreens
.
This tab shows the following parameters:
Orientation
: allows assigning a
horizontal
or
vertical
orientation to the
device, making it easier to identify the push-buttons during the configuration
process (ETS will show a figure with the final distribution of the push-buttons).
To prevent inconsisce in the configuration, please note the following
criterium:
Vertical (normal):
Temperature probe hole
on the left of the bottom
side.
Horizontal (rotated):
Temperature probe hole
on the bottom of the right
side.
Note
:
this parameter is only available in some models (see section 2.3).
