InZennio Z41
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
46
Note
:
a list with all the icons available in Z41 can be found in document “Z41
Icon list”, available at www.zennio.com
.
c) Scene Control
In this case, the central button of the box will react to user presses by sending
a scene value to the KNX bus through the
[General] Scenes: send
object,
which is enabled by default. Parameter
Scene number
permits specifying the
number of the scene (1 – 64) to be sent. Moreover,
Action
(which shows the
options “Run” and “Run and save”) sets whether the device will only send
scene execution orders (after a short press) or if it will be possible, in addition
to sending execution orders upon short presses, to send scene save orders in
the case of a long press.
Figure 42
Scene control
Finally, the dropdown list next to
Button (in the middle)
permits selecting an
icon to be displayed inside the button.
Note
:
a list with all the icons available in Z41 can be found in document “Z41
Icon list”, available at www.zennio.com
.
3.4.2.3
2-BUTTON CONTROL
Figure 43
2-button control (Box)
Boxes configured as 2-button controls consist in an indicator and two buttons that,
when touched, trigger the sending of an action to the KNX bus through a certain object.
This category also includes some specific controls such as
lighting
and
shutter
controls.