InZennio Z41
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
30
•
Time to Activate the Welcome Object
: minimum time of inactivity (in
minutes) before a new press on the touch panel triggers the sending of
the welcome object. By default, it is 1 minute.
Figure 19
Touch Lock (Time to activate the welcome object configuration – 1 bit object)
If “Scene” is selected, the
[General] Scenes: Send
object, already
enabled in the beginning, will work as the welcome object. In this case, the
following two parameters come up:
•
Scene Number
: number of the scene (1-64) that will be sent to the bus.
The default value is “1”.
•
Time to Activate the Welcome Object
: minimum time of inactivity (in
minutes) before a new press on the touch panel triggers the sending of
the parameterised scene. By default, it is 1 minute.
Figure 20
Touch Lock (Time to activate the welcome object configuration - Scene)