Zennio ZCL-ZB4, User Manual

Page: 41 / 44

ZoningBOX 6/ ZoningBOX 4
http://www.zennio.com Technical Support: http://support.zennio.com
41
ANNEX II. COMMUNICATION OBJECTS
“Functional range ” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any
use or have a particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself
.
Number Size I/O Flags Data type (DPT)
Functional
Range
Name Function
1 1 Bit C - - T - DPT_Trigger 0/1 Reset 0 Voltage Recovery -> Sending of 0
2 1 Bit C - - T - DPT_Trigger 0/1 Reset 1 Voltage Recovery -> Sending of 1
3
1 Bit I C - W - - DPT_Switch 0/1 Manual Control Lock 0 = Lock; 1 = Unlock
1 Bit I C - W - - DPT_Switch 0/1 Manual Control Lock 0 = Unlock; 1 = Lock
4, 8, 12, 16, 20, 24, 28, 32,
36, 40, 44, 48
1 Bit I C - W T U DPT_Enable 0/1 [Group x] [Zx] Disable/Enable Zone 0 = Disable; 1 = Enable
5, 9, 13, 17, 21, 25, 29, 33,
37, 41, 45, 49
2 Bytes I C - W T U DPT_Value_Temp
-273.00º -
670433.28º
[Group x] [Zx] Setpoint Temperature Setpoint Temperature
6, 10, 14, 18, 22, 26, 30, 34,
38, 42, 46, 50
2 Bytes I C - W T U DPT_Value_Temp
-273.00º -
670433.28º
[Group x] [Zx] Reference Temperature Reference Temperature
7, 11, 15, 19, 23, 27, 31, 35,
39, 43, 47, 51
1 Bit I C - W T U DPT_Switch 0/1
[Group x] [Zx] Control Signal from
Thermostat
0/1
1 Byte I C - W T U DPT_Scaling 0% - 100%
[Group x] [Zx] Control Signal from
Thermostat
0...100%
52, 55, 58, 61, 64, 67, 70, 73,
76, 79, 82, 85
1 Bit O C R - T - DPT_OpenClose 0/1 [Group x] [Gx] [Control] Grille Control 0 = Open; 1 = Close
1 Byte O C R - T - DPT_Scaling 0% - 100% [Group x] [Gx] [Control] Grille Control 0…100%
53, 56, 59, 62, 65, 68, 71, 74,
77, 80, 83, 86
1 Bit I C - W T U DPT_OpenClose 0/1 [Group x] [Gx] [Control] Grille Status 0 = Open; 1 = Closed
1 Byte I C - W T U DPT_Scaling 0% - 100% [Group x] [Gx] [Control] Grille Status 0…100%
54, 57, 60, 63, 66, 69, 72, 75,
78, 81, 84, 87
1 Byte I C - W T U DPT_DecimalFactor [Group x] [Gx] Weight Factor 0…99
88, 121 1 Bit O C R - T - DPT_Switch 0/1 [Unit x] On/Off HVAC Unit 0 = Off; 1 = On
89, 122 1 Bit I C - W T U DPT_Switch 0/1 [Unit x] On/Off HVAC Unit (Status) 0 = Off; 1 = On
90, 123 1 Byte I C - W T U DPT_HVACContrMode
0=Auto
1=Heat
3=Cool
9=Fan
14=Dry
[Unit x] Mode HVAC Mode
91, 124 1 Byte O C R - T - DPT_HVACContrMode 0=Auto [Unit x] Mode (Status) HVAC Mode State