Zennio Z41 COM, Configuration Manual

Page: 19 / 21

Z41 COM + Zennio GetFace IP Configuration Guide
http://www.zennio.com Tecnical Support : http://support.zennio.com
19
3.3.2 GETFACE IP CONFIGURATION
The configuration of GetFace IP is the same as indicated in section 2.2 , but also, it is
necessary to configure:
1. Services

HTTP API

Account x
1.1. Account Enabled : Enabled .
1.1.1. User Name : the same as the user name configured in Z41 COM.
1.1.2. Password : the same as the password configured in Z41 COM.
IMPORTANT: it must be the same User Name and Password as the ones
entered in 1.2.1 in the previous section 3.3.1.
1.2. Switch Access
– Control
: Enabled .
Figure 15 Zennio GetFace
– Account Configuration.
2. Hardware

Switches

Switch x
2.1. Enabled Switch : Enabled .
2.1.1. Controlled Output : select Relay 1 or Output 1.