Z41 COM + Zennio GetFace IP Configuration Guide
Tecnical Support
11
Figure 7
GetFace IP - Configuration menu
For a basic installation, only the following parameters must be configured:
2.
Directorio
Usuarios:
add user.
Figure 8
GetFace IP - Add user
2.1.
Phone number:
it will be used the Number 1 by default. The format should be
sip:id@[IPaddress]
. The “id” will only be used to identify calls in the event log in
the state section. Example:
.
IMPORTANT:
The IP address must be the same configured by parameter in
Z41 COM (item 1.1 in section 2.1).