ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
18
18
Unlocking method:
ZAS buttons may be unlocked by means of: the 1-bit object
"[General] Touch unlock" (
with value “0” or “1”, configurable), via scenes (configurable
scene number 1-64), or pressing the ZAS touch panel, which also allows sending a
welcome object (1-
bit object or scene), through the objects “[General] Welcome object”
and “[General] Scene: receive”, respectively.
Note:
do not
confuse the possibility to send a 1-bit v
alue through the “[General] Welcome
object” on the unlocking event (i.e., pressing whatever part of the touch panel –including
the central area
– while locked) with the possibility of using the central area of the touch
panel as a binary control (i.e., for
sending the value “0” or “1” through the object
“[General] Central button”) while unlocked.
Lock IR as well?:
option to lock the remote control at the same time as the touch
panel ("Yes"). In this case, presses over the remote will not be taken into account until
ZAS is unlocked.
Figure 3.5. Touch locking
Initial update.
This functionality is intended for updating the value of the general
indicators (if they were enabled by parameter) as well as the values of the 1-bit objects
associated to the buttons, and the object "[General] Time", on bus power recovery after a
power failure. Moreover, a delay after the power recovery is possible before the request for
the initial values is sent (to get an immediate sending, set 0 in this field).
Note:
If this function is not enabled, the values prior to the bus power failure will be kept.
Remote control.
When enabling this option in the general menu, the operation of the
remote control will be activated, to remotely control ZAS.
