ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
15
15
Figure 3.2. Configuration screen by default
As seen in figure 3.2, the configuration screen contains the following main windows:
General:
destined to enable and configure the basic functionalities of the controller and
the remote control.
Pages:
destined to enable and configure each available page individually, as well as the
way to navigate through them and to configure the screensaver configuration.
Inputs:
destined to enable and configure each input of the controller individually.
Thermostats:
destined to enable and configure each thermostat of the controller
individually.
Presence simulation:
destined to enable the presence simulation and to configure its
parameters.
In the following sections, all the aforementioned windows are explained in detail.
3.2. GENERAL
The General window allows enabling and configuring the basic functionalities of the
controller and the remote control.
The basic functions that can be configured in section General are the following: