KLIC-MITTE
Technical Support:
9
Compensation Curve:
is intended to be modified by the wired remote
control, therefore, the sending of setpoints from KLIC-MITTE in this
mode is meaningless.
Note:
When control by Compensation Curve is established only in
Heating Mode, it should be taken into account that, in that case, the
temperature control is performed entirely by the machine, so
any
temperature setpoint sent to the KLIC will be ignored
and the flow
temperature setpoint calculated by the machine using the
compensation curve will return by the status object. Thus, as explained
above, what is shown on the control and on the status object of the
KLIC is:
o
Wired remote control
: shows the increase or decrease in
temperature that the user wishes to perform on the flow
temperature setpoint calculated by the machine.
o
KLIC-MITTE
: flow temperature resulting from applying the
internal compensation curve of the machine plus the increase
desired by the user from the wired remote control.
Domestic Home Water (DHW) control and supervision
: its operation is
based on the activation of a heat pump that heats the water to the desired
temperature.
Setpoint temperature:
temperature at which the water in the DHW tank
will be heated.
DHW operating and permission status:
allows to discern when the unit
is heating water and when it is not and if it is authorised.
On the other hand, KLIC-MITTE allows the configuration of the following advanced
functions:
Advanced Modes
: allows to enable objects to activate the general
Holiday
Mode
, and the
Economy
and
Forced Modes
in the DHW system.
Initial Configuration:
allows to define the desired initial value for the unit
states after the device has been programmed or restarted.
