Zennio KLIC-MITTE, User Manual

Page: 21 / 23

KLIC-MITTE
http://www.zennio.com Technical Support: http://support.zennio.com
21
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Light Off Sending of 0 (Off)
1 Bit I C T - W - DPT_Switch 0/1 [Ix] [Long Press] Light On/Off Switching 0/1
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Run Scene Sending of 0 - 63
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Save Scene Sending of 128 - 191
1 Bit O C T R - - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm: Breakdown or
Sabotage
1 = Alarm; 0 = No Alarm
2 Bytes C T - - - 9.xxx -671088.64 - 670760.96 [Ix] [Long Press] Constant Value (Float) Float Value
2 Bytes C T - - - DPT_Value_2_Ucount 0 - 65535
[Ix] [Long Press] Constant Value
(Integer)
0 - 65535
1 Byte C T - - - DPT_Scaling 0% - 100%
[Ix] [Long Press] Constant Value
(Percentage)
0% - 100%
1 Byte C T - - - DPT_Value_1_Ucount 0 - 255
[Ix] [Long Press] Constant Value
(Integer)
0 - 255
38, 44 1 Bit C T - - - DPT_Trigger 0/1 [Ix] [Long Press/Release] Stop Shutter Release -> Stop Shutter
39, 45
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Dimming Status (Input) 0% - 100%
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Shutter Status (Input) 0% = Top; 100% = Bottom
46 1 Byte I C - - W - DPT_SceneNumber 0 - 63 [Motion Detector] Scene Input Scene Value
47 1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Output Scene Value
48, 77 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Luminosity 0-100%
49, 78 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Open Circuit Error 0 = No Error; 1 = Open Circuit Error
50, 79 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Short Circuit Error 0 = No Error; 1 = Short Circuit Error
51, 80 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Presence State (Scaling) 0-100%
52, 81 1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Ix] Presence State (HVAC)
Auto, Comfort, Standby, Economy,
Building Protection
53, 82
1 Bit O C T R - - DPT_Occupancy 0/1 [Ix] Presence State (Binary) Binary Value
1 Bit O C T R - - DPT_Ack 0/1 [Ix] Presence: Slave Output 1 = Motion Detected
54, 83 1 Bit I C - - W - DPT_Window_Door 0/1 [Ix] Presence Trigger
Binary Value to Trigger the Presence
Detection
55, 84 1 Bit I C - - W - DPT_Ack 0/1 [Ix] Presence: Slave Input
0 = Nothing; 1 = Detection from slave
device
56, 85 2 Bytes I C - - W - DPT_TimePeriodSec 0 - 65535 [Ix] Presence: Waiting Time 0-65535 s.
57, 86 2 Bytes I C - - W - DPT_TimePeriodSec 0 - 65535 [Ix] Presence: Listening Time 1-65535 s.
58, 87 1 Bit I C - - W - DPT_Enable 0/1 [Ix] Presence: Enable According to parameters
59, 88 1 Bit I C - - W - DPT_DayNight 0/1 [Ix] Presence: Day/Night According to parameters
60, 89 1 Bit O C T R - - DPT_Occupancy 0/1 [Ix] Presence: Occupancy State 0 = Not Occupied; 1 = Occupied
61, 90 1 Bit I C - - W - DPT_Ack 0/1 [Ix] External Motion Detection
0 = Nothing; 1 = Motion detected by an
external sensor
62, 67, 72, 91, 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] [Cx] Detection State (Scaling) 0-100%