KLIC-LG1
http://www.zennio.com
Technical Support:
http://support.zennio.com
22
“Four levels”:
Control Values
Status Values
Level Sent to the
Unit
1-25%
25%
1 (minimum)
26-50%
50%
2
51-75%
75%
3
76-100%
100%
4 (maximum)
Table 3. Fan speed (four levels).
Automatic Mode Available
: sets whether the A/C unit incorporates an
automatic fan speed mode. If enabled,
value “0%” of the "
[AC]
Speed:
Percentage Control
”
and "
[AC]
Speed: Percentage Control (Status)
"
objects will be reserved for triggering or reporting such mode, respectively.
Moreover, two more parameters will show:
Individual Object for Automatic Speed
: enables the “
[AC] Speed:
Automatic
” and “
[AC] Speed: Automatic (Status)
” 1-Bit objects, which
will let activating/deactivating the automatic mode or reading the current
status, respectively.
Automatic Speed Object Polarity
: sets the polarity of the above objects:
“0 = Automatic Off; 1 = Automatic On” or “0 = Automatic On; 1 = Automatic
Off
”.
2.4.3
FLAPS
The Flaps function allows sending the A/C unit orders to switch the position of the flaps
(or vanes) that direct the air flow outwards. To that end, KLIC-LG1 provides a
percentage
control.
In addition, KLIC-LG1 allows activating the
direct positioning
of the flaps and the
swing
and
swirl functions
(so the flaps oscillate continuously for better distribution of the
airflow), in case of being available in the unit.
Referring to the user manual of the A/C unit is advisable prior to setting up these options.
