KLIC-LG1
http://www.zennio.com
Technical Support:
http://support.zennio.com
12
2.3
LOGIC FUNCTIONS
This module makes it possible to perform numeric and binary operations with incoming
values received from the KNX bus, and to send the results through other communication
objects specifically enabled for this purpose.
KLIC-LG1 can implement
up to 10 different and independent functions
, each of them
entirely customisable and consisting in
up to 4 consecutive operations each
.
The execution of each function can depend on a configurable
condition
, which will be
evaluated every time the function is
triggered
through specific, parameterizable
communication objects. The result after executing the operations of the function can also
be evaluated according to certain
conditions
and afterwards sent (or not) to the KNX
bus, which can be done every time the function is executed, periodically or only when
the result differs from the last one.
Please refer to the
“
Logic Functions
” user manual (available in the KLIC-LG1 product
section at the Zennio homepage,
www.zennio.com
) for detailed information about th
e
functionality and the configuration of the related parameters.
