Zennio KLIC-DA LT, User Manual

Page: 18 / 20

KLIC-DA LT
http://www.zennio.com Soporte técnico: http://zennio.zendesk.com
18
ANNEX I. COMMUNICATION OBJECTS
“Functional range
” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have a particular meaning
because of the specifications or restrictions from both the KNX standard or the application program itself.
“ 1st boot ” shows the cases where an object is assigned a certain value by the application program after a device download or a full reset. In case the value of such assignment can
be parameterised, √
is shown in column “
P
”.
Objects showing a hyphen (-) are not assigned a particular value and therefore can be assumed to be initialised with the value “0”, or with
the corresponding updated value in case they depend on an external element (sensors, etc.). Moreover, if the object is sent (or is there an option to send it) to the bus (write or read
requests) after a download or a device reset from ETS, the marks
(W) or (R) will be shown, respectively for transmissions or read requests.
“ Reboot ” shows the cases where an object is assigned a certain value by the application program after a bus power failure. In case the value of such assignment can be
parameterised, √
is shown in column “ P ”.
Objects showing a hyphen (-) are not assigned a particular value and therefore can be assumed to maintain their previous value after the
failure, or with the corresponding updated value in case they depend on external elements. Moreover, if the object is sent (or is there an option to send it) to the bus (write or read
requests) after a bus failure, the marks
(W) or (R) will be shown, respectively for transmissions or read requests.
No. Size I/O Flags Data Type (DPT) Functional Range 1st boot P Reboot P Name Function
0 1 Bit I C - - W - DPT_Switch 0/1 - - [DHW] On/Off Turn On/Off DHW Tank
1 1 Bit I C - - W - DPT_Switch 0/1 - - [DHW] Booster Mode On/Off Turn On/Off DHW Tank Booster Mode
2 2 Bytes I C - - W - DPT_Value_Temp -273.0 - 670760.0 - - [DHW] Temperature DHW Tank Setpoint Temperature
3 1 Bit I C - - W - DPT_Switch 0/1 - - [Climate] On/Off Turn On/Off Climate control
4 1 Bit I C - - W - DPT_Heat_Cool 0/1 - - [Climate] Operation Mode Set: 0=Cooling; 1=Heating
5 2 Bytes I C - - W - DPT_Value_Temp -273.0 - 670760.0 - - [Climate] Temperature Climate Setpoint Temperature
6 1 Bit O C T R - - DPT_Switch 0/1 - W - W [DHW] On/Off (Status) Status of DHW Tank (On/Off)
7 1 Bit O C T R - - DPT_Switch 0/1 - W - W [DHW] Booster Mode On/Off (Status) Status of DHW Tank Booster Mode (On/Off)
8 2 Bytes O C T R - - DPT_Value_Temp -273.0 - 670760.0 - W - W [DHW] Temperature (Status) Current DHW Tank Setpoint Temperature
9 1 Bit O C T R - - DPT_Bool 0/1 - W - W [DHW] Operating (Status) 0=Not Operating; 1=Operating
10 1 Bit O C T R - - DPT_Switch 0/1 - W - W [Climate] On/Off (Status) Status of Climate control (On/Off)
11 1 Bit O C T R - - DPT_Heat_Cool 0/1 - W - W [Climate] Operation Mode (Status) Current Mode: 0=Cooling; 1=Heating
12 2 Bytes O C T R - - DPT_Value_Temp -273.0 - 670760.0 - W - W [Climate] Temperature (Status) Current Climate Setpoint Temperature
13 1 Bit O C T R - - DPT_Bool 0/1 - W - W [Climate] Operating (Status) 0=Not Operating; 1=Operating
14 1 Bit O C T R - - DPT_Bool 0/1 - - Malfunction 0=No Malfunction; 1=Malfunction
15 1 Bit O C T R - - DPT_Bool 0/1 - - Communication Error 0=No Error; 1=Error
16 2 Bytes O C T R - - DPT_Value_Temp -273.0 - 670760.0 - W - W [Temperatures] DHW Tank Current DHW Tank Temperature