Zennio FlatSensato, User Manual

Page: 25 / 27

Air Sensato THCDE
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
25
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Run Scene Sending of 0 - 63
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Save Scene Sending of 128 - 191
1 Bit O C T R - - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm:
Breakdown or Sabotage
1 = Alarm; 0 = No Alarm
2 Bytes C T - - - 9.xxx -671088.64 - 670760.96
[Ix] [Long Press] Constant Value
(Float)
Float Value
2 Bytes C T - - - DPT_Value_2_Ucount 0 - 65535
[Ix] [Long Press] Constant Value
(Integer)
0 - 65535
1 Byte C T - - - DPT_Scaling 0% - 100%
[Ix] [Long Press] Constant Value
(Percentage)
0% - 100%
1 Byte C T - - - DPT_Value_1_Ucount 0 - 255
[Ix] [Long Press] Constant Value
(Integer)
0 - 255
18, 24 1 Bit C T - - - DPT_Trigger 0/1
[Ix] [Long Press/Release] Stop
Shutter
Release -> Stop Shutter
19, 25
1 Byte I C - - W - DPT_Scaling 0% - 100%
[Ix] [Long Press] Dimming Status
(Input)
0% - 100%
1 Byte I C - - W - DPT_Scaling 0% - 100%
[Ix] [Long Press] Shutter Status
(Input)
0% = Top; 100% = Bottom
26, 30 2 Bytes O C T R - - DPT_Value_Temp -273.00 - 670760.00 [Ix] Current Temperature Temperature Sensor Value
27, 31 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Overcooling 0 = No Alarm; 1 = Alarm
28, 32 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Overheating 0 = No Alarm; 1 = Alarm
29, 33 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Probe Error 0 = No Alarm; 1 = Alarm
34 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Input Scene Value
35 1 Byte O C T R - - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Output Scene Value
36, 65 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Luminosity 0-100%
37, 66 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Open Circuit Error
0 = No Error; 1 = Open Circuit
Error
38, 67 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Short Circuit Error
0 = No Error; 1 = Short Circuit
Error
39, 68 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Presence State (Scaling) 0-100%
40, 69 1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Ix] Presence State (HVAC)
Auto, Comfort, Standby, Economy,
Building Protection
41, 70
1 Bit O C T R - - DPT_Occupancy 0/1 [Ix] Presence State (Binary) Binary Value
1 Bit O C T R - - DPT_Ack 0/1 [Ix] Presence: Slave Output 1 = Motion Detected
42, 71 1 Bit I C - - W - DPT_Window_Door 0/1 [Ix] Presence Trigger
Binary Value to Trigger the
Presence Detection
43, 72 1 Bit I C - - W - DPT_Ack 0/1 [Ix] Presence: Slave Input
0 = Nothing; 1 = Detection from
slave device
44, 73 2 Bytes I C - - W - DPT_TimePeriodSec 0-65535 [Ix] Presence: Waiting Time 0-65535 s.