Pg 12 of 32
www.zennahome.com IS04020-I
Step 1 - Attaching the Mounting Brackets
Tension Mount Installation - For Permanent Mount Installation go to page (5)
• With the arrows on the mounting bracket for the 7/8 in. diameter tube (C) pointing
UP and DOWN
, fasten the
7/8 in. diameter tube assembly (C) to the mounting bracket for the 7/8 in. diameter tube (B) using the
mounting bracket screw (2) and threaded insert (3).
NOTE:
The flat side of the 7/8 in. diameter tube assembly (C)
should be facing
DOWN
.
• Tighten the mounting bracket screw (2) and threaded insert (3) using the large allen wrenches (5).
•
Repeat this step for the 1 in. diameter tube (D).
2
C
B
flat side facing down
3
