Pg 10 of 32
www.zennahome.com IS04020-I
Permanent Mount
• Drill the 2 marked spots for each mounting bracket (A) and (B) .
• Insert drywall anchors (7) into wall, as shown.
NOTE:
If needed, using a hammer, lightly tap drywall
anchors (7) into wall.
•
NOTE:
Do not use a wall anchor if mounting screw will be going into a stud.
NOTE:
Use a 1/4 in. (6mm) drill bit for drywall anchor installation. Use a 1/8 in. (3mm) drill bit for direct
stud installation. If installing into a material other than drywall or into stud,
consult a professional for proper installation.
Step 7 - Installing Wall Anchors
NOT SHOWN TO SCALE
