background image

©2013 

DJI  Innovations.  All  Rights  Reserved.             

                                                                                                                       

 

Warning & Disclaimer 

No adjusting or amending is allowed to Z15. 

Z15 is specialized for Camera and Lens before it leaves the factory. Please mount your camera to Z15 when get it. 

No adjusting or amending is allowed to Z15. Do not modify or add any other component/device (such as filter, lens 

hood, etc.) to the camera; make sure to use the original battery; otherwise it may ends up with worse performance 

or even internal malfunction. 

Z15 can only work with Flight control system specified by DJI Innovations (

Ace One/ Ace WayPoint/ WooKong M, 

make sure to upgrade the flight control system to the latest firmware version

)

, so as to ensure the highest stability 

and precision

. Please  download  the  corresponding  assistant  software  and  upgrade  the  flight  control system MC 

firmware, otherwise may lead the Z15 work abnormally.

 

Make sure the Flight control system operates in the safest manner when the main power battery is connected. We 

strongly recommend customers to remove all propellers, use power supply from R/C system or flight pack battery, 

and keep children away during gimbal calibration and parameter setup. Please strictly follow these steps to mount 

and connect gimbal on your aircraft, as well as to install the assistant software on your computer.

 Please respect 

the AMA’s National Model Aircraft Safety Code.

   

As DJI Innovations has no control over use, setup, final assembly, modification (including use of non-specified DJI 

parts  i.e.  motors,  ESCs,  propellers,  etc.)  or  misuse,  no  liability  shall  be  assumed  nor  accepted  for  any  resulting 

damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. DJI assumes no liability 

for damage(s) or injuries incurred directly or indirectly from the use of this product. 

DJI and Zenmuse  are  registered  trademarks  of  DJI  Innovations Names  of product, brand,  etc.,  appearing  in this 

manual are trademarks or registered trademarks of their respective owner companies. This product and manual are 

copyrighted by DJI Innovations with all rights reserved. No part of this product or manual shall be reproduced in 

any form without the prior written consent or authorization of DJI Innovations. No patent liability is assumed with 

respect to the use of the product or information contained herein.

 

 

Specified

 Camera and Lens Type list for Z15-GH3

.

   

 

Camera Type 

Panasonic GH3 

Lens Type

 

OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0 

 

 

 

 

Summary of Contents for Z15-GH3


























Reviews: