Zenith XBR413, Manual

Page: 92 / 162

3-117
No. Pin Name Type Description
81 TE2 OUTPUT Tracking error signal output.
82 TE OUTPUT Tracking error signal output for Servo.
83 PPALL OUTPUT Main side push-pull signal output.
84 SBAD OUTPUT Sub beam signal output [ (E+F+G+H) signal].
85 SPP2 Sub beam signal output [ (F+G)-(E+H) signal].
86 FE OUTPUT Focus error signal.
87 GND7 - Analog GND
88 MONI3 OUTPUT Internal signal monitor port.
89 CRC - Radial contrast circuit condenser connecting port.
90 RECD OUTPUT No recording area detection.
91 HOLD OUTPUT Detection signal output.
92 MIRR OUTPUT Mirror detection/RCA signal output.
93 FOK OUTPUT Focus OK signal.
94 CDEF2 - Detect circuit condenser connecting port 2.
95 CMIRR - Mirror circuit condenser connecting port.
96 CDEF - Detect circuit condenser connecting port .
97 CBPD -
β
,
γ
adetection[peak]condenser connecting port.
98 CBBD -
β
,
γ
adetection[buttom]condenser connecting port.
99 RFEQO OUTPUT Equalizer output.
100 VCC8 - Analog power.
101 CEQOS2 - RF Equalizer circuit condenser connecting port 2.
102 CEQOS1 - RF Equalizer circuit condenser connecting port 1.
103 GND8 - Analog GND
104 REQ - RF Equalizer circuit volatage setting resistance connecting port.
105 CEQ - Equalizer fc automatic control curcuit condenser connecting port.
106 CDPDD - DPD [D signal] HPF band setting condenser connecting port.
107 CDPDC - DPD [C signal] HPF band setting condenser connecting port.
108 GND9 - Analog GND
109 CDPDC - RFAGC circuit condenser connecting port.
110 CDPDRF - DPD [RF signal] HPF band setting condenser connecting port.
111 CDPDRF - DPD [B signal] HPF band setting condenser connecting port.
112 CDPDA - DPD [A signal] HPF band setting condenser connecting port.
113 VCC9 - Analog power.
114 AGCIN INPTU AGC input
115 RFO OUTPUT Read RF signal output.
116 VCC1 - Analog power.
117 WRFLP OUTPUT Write RF LPF output.
118 WRF OUTPUT Write RF signal output.
119 WFR2 OUTPUT Write RF2 signal output.
120 MONI1 OUTPUT Internal signal monitor port.