31
RECORDING
DUBBING AND EDITING
power
stop/eject
Camcorder:
Play
Another VCR: Play
Your VCR: Recording
OR
From
AUDIO and
VIDEO Output
From
AUDIO and
VIDEO Output
To AUDIO/VIDEO Input
1
Connect the camcorder’s (or another VCR’s) A/V outputs to your VCR as illustrated above.
2
Set the input channel “LINE2”.
•
If you have connected your VCR to the A/V input jacks on the rear of VCR, you should
select the input channel LINE2.
•
To select an A/V input channel (LINE1 or 2), select the next highest or lowest channel
programmed in the VCR with the
CH/TRK (
D
D
/
E
E
)
.
3
Play the tape in the camcorder (or another VCR). If you have a TV attached to your VCR,
you can see the video playing.
4
When you desire recording to begin, press VCR’s
REC/ITR
once to start.
Before recording, please confirm the recording start position.
NOTE
If you wish to edit or dub your camcorder (or another VCR) recordings to this VCR, the rear
(or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and
easy. The direct A/V jacks will also provide better picture results than using the RF jack on the
rear panel.
