19
PREP
ARA
TION
VIDEO CASSETTE TAPES
This VCR will operate with any video cassette which has
the
mark. The table below shows the recording/playback
time of VHS cassettes when they are used in the SP, LP and
SLP speeds. (LP speed is for playback only.)
•
Do not expose video cassettes to extreme heat, high humidi-
ty, or strong magnetic fields.
•
Do not tamper with the cassette mechanism.
•
Do not touch the tape with your fingers.
•
Always store an unused cassette in its case.
Hold the cassette with the arrow side up (top). Insert the
cassette gently into the slot in the direction of the arrow (on the
cassette) until the loading mechanism automatically pulls the
cassette into the unit. Make certain that the cassette is inserted
correctly.
•
If the cassette is not loaded correctly, the VCR will eject the
cassette automatically after approximately 3 seconds.
Press
STOP/EJECT
twice or press
EJECT
on the remote con-
trol. The cassette will be ejected automatically. After the cassette
is visible in the tape slot, pull it out to remove it.
•
Unloading the cassette is possible only when the power cord
is connected to the wall outlet.
•
The cassette can be ejected when
STOP/EJECT
is pressed,
even if the VCR’s power is OFF.
UNLOADING
LOADING
WHEN HANDLING VIDEO CASSETTES
TYPE
T-60
T-120
T-160
SPEED
SP MODE
60 mins.
120 mins.
160 mins.
LP MODE
120 mins.
240 mins.
320 mins.
SLP MODE
180 mins.
360 mins.
480 mins.
To prevent accidental era-
sure, remove the tab after
recording.
To record again cover the
hole with vinyl tape.
SAFETY TAB
